One of the finest features of current smartphones is that they are typically water resistant; however, this does not mean that they are completely immune to liquid-related difficulties. If your iPhone displays “Liquid Detected” or “Charging Not Available,” you should act promptly to protect your phone.
Tap your iPhone lightly on your hand with the Lightning connection facing down to drain excess moisture. Place your iPhone somewhere dry and well-ventilated. After that, after at least 30 minutes, try charging using a Lightning cable or adding a Lightning accessory.
Given this, if you get the warning again, there is still liquid in the Lightning port or between the pins of the Lightning cable. Allow your iPhone to sit in a dry, well-ventilated area for up to a day. You can attempt charging or attaching a Lightning item again during this period. It might take up to 24 hours to dry completely.
If you charge your iPhone when the Lightning port is damp, the pins on the port or the cable might corrode and cause irreversible damage or cease working. Although you should not charge your iPhone when it is wet, in an emergency, you may need to. If you reattach your iPhone to the Lightning cable or accessory, you can override the liquid detection and charge your iPhone in an emergency.
What to Do If iPhone Shows ‘Liquid Detected in Lightning Connector’ Error
Apple frequently distributes beta versions for testing in order to guarantee that new upgrades are user-friendly and free of problems. However, as shown on numerous places such as Reddit, a “Liquid Detected in Lightning Connector” notice has been upsetting iPhone users. Before we get into what you should do if you receive this liquid detection signal, here are some things you should not do:
What not to do:
- DO NOT hit the Emergency Override button (seen in some iOS versions) until you are certain there is no liquid present.
- Do not blow out the Lightning charging port with compressed air.
- Avoid using any other Lightning accessory with your phone.
- Do not insert cotton buds or other absorbent objects into the port.
- Don’t try to dry the port or cable with heat, such as a hair drier.
What to do:
- If you see this warning after connecting to a Lightning cable, unplug it immediately. Not only does this lessen the likelihood of an electrical short, but it also
- While you don’t want to utilize the Emergency Override option right away, the Dismiss button is safe to use.
- It’s a good idea to switch off your phone to preserve battery power until you can charge it again.
- Apple highly cautions avoiding inserting anything, including cotton swabs, into the Lightning connector, especially anything electrical, such as metal pins.
- If feasible, position the port such that gravity can assist eliminate moisture faster.
How to Fix Liquid Detected in Lightning Connector on iPhone
If water got into your iPhone’s port, you could notice it right away. When you connect it to a charger. However, you will receive the ‘Liquid detected in Lightning Connector’ or ‘Charging Not Available’ message. This notice is provided by Apple as a safety precaution to safeguard your iPhone and charging accessories from harm and corrosion. Remove all wires and accessories. Do not reconnect them until they are entirely dry. To dry your iPhone, follow these steps:
- When the Liquid Detection Alert appears, dismiss it: When the message “liquid detection in lightning connector” comes, the sensible first move should be to ignore the news and then look for other remedies.
- Reboot: If you are still experiencing problems with this warning after doing the first two ways, you can try restarting your iPhone.
- Software issue: Problems with an unexpected warning about liquid detection are most common in phones running iOS 16/15 or older. People are beginning to doubt the operating system. So, resolving the flaw in the operating system will solve the problem.
- Service Centre: If the procedures earlier do not work, you will have no choice but to seek expert help. If the phone displays “Liquid detection in Lightning Connector,” do not open it or poke anything. Allow the authorities to handle the situation.
Steps to Fix: A Comprehensive Guide to Resolving Issues
Even a small amount of water can cause the connections to short and destroy your iPhone. As a result, it is critical not to dismiss this warning. If you’re having problems charging your iPhone due to a similar issue, we’ve compiled a list of troubleshooting steps that may be of assistance. So, without further delay, let’s have a look at them.
Dry your iPhone
The first step is to unhook any wires or accessories from your iPhone and turn it off. Then, shake your iPhone lightly with the port pointing down to eliminate any excess moisture. Wipe the lightning wire with a soft, dry cloth while you’re at it. Allow your iPhone to rest for around 30 minutes before turning it back on. Charge your iPhone again and check to see whether the error ‘Liquid detected in Lightning Connector’ shows.
Check the lightning cable
The next step is to look for evidence of damage in your lightning cord. The normal wear and tear on your lightning cable’s connection might harm it over time. As a result, you may have difficulty charging your iPhone and get a variety of errors, including this one. If feasible, try charging your iPhone with a different cable to see if it resolves the problem.
Use Apple Charger
Unauthorized chargers and lightning cords are notorious for not working properly with iPhones. When utilizing an unknown brand’s cheap charger or cable, you’ll frequently get an alert saying that the item isn’t supported or certified. The ‘Liquid detected in Lightning Connector’ issue might be to blame.
An Emergency Override option is also available for the ‘Liquid detected in Lightning Connector’ issue. This essentially allows you to charge your iPhone while ignoring the problem warning. However, only do this if you are positive that your iPhone is completely dry. Apple recommends only utilizing this option in an emergency, as ignoring the alert and charging a wet iPhone might lead to more catastrophic problems.
It’s inconvenient when you can’t charge your iPhone because of such issues. Hopefully, the troubleshooting tips saved you a trip to the Apple Store, and you can charge your iPhone normally now.
frequently asked questions
1. Why does my phone keep saying liquid is detected in the Lightning connector?
If there is any moisture on the lightning accessory or within the charging port, the message “Liquid Detected in Lighting Connector” will appear. If you receive this alert every time you connect a specific cable or accessory, it is possible that the cable or accessory is broken. Please contact the manufacturer. Contact Apple Support if you notice this alert every time you attach an Apple Lightning cable or accessory.
2. Can I override the liquid detected in the Lightning connector?
Yes, in an emergency, you can override the liquid detected in the lightning connection message and charge your phone. You may accomplish this by withdrawing and reinserting the charging wire. The same “liquid detection” notice will show, but you’ll now have the option to press Emergency Override and charge your phone.
3. How do I get the liquid out of my charging port?
Allowing the phone to dry naturally is one of the most effective methods. The water within the port will usually evaporate in a few hours. Make careful to keep the phone upright while you’re doing this. It’s also a good idea to keep your phone in a well-ventilated environment. Within 1 to 2 hours, water will naturally evaporate from the charging port. If any liquid other than freshwater enters your device’s charging port, you must clean it with fresh water and completely dry it with a dry, soft towel.